Heat Desiccant Air Dryer Tech Parameter:
| Rated Processing Air flow | 20 to 150CBM/MIN |
| Inlet Pressure | 0.45-1.0Mpa |
| Inlet Temperature | <=40 Degree |
| Inlet Oil Content | 0.08ppm |
| Outlet Air Pressure Dew Point | "-60 to -20 degree |
| Dust Grain Diameter in Outlet Air | <=60 |
| Average Regenerate Air Flow | 5% to 8% Rated Processing air flow |
| Pressure Drop | <=0.021Mpa |
| Absorbate | Activated Aluminium oxlde, Molecular Sleve |
| Regeneration Method | Micro-Heating |
| Working Method | Auto switch of two towers, continuous operation |
| Control Method | PLC control, 60min cycle of loop |
| Installation | Indoor, non-basis installation allowed |
| Power Supply | 1PH/220V/50HZ |
Heatless Desiccant Air Dryer Parameter
| Rated Processing Air flow | 1 to 150CBM/MIN |
| Inlet Pressure | 0.45-1.0Mpa |
| Inlet Temperature | <=40 Degree |
| Inlet Oil Content | 0.08ppm |
| Outlet Air Pressure Dew Point | "-40 to -20 degree |
| Dust Grain Diameter in Outlet Air | <=60 |
| Average Regenerate Air Flow | 10% to 22% Rated Processing air flow |
| Pressure Drop | <=0.021Mpa |
| Absorbate | Activated Aluminium oxlde, Molecular Sleve |
| Regeneration Method | Normal Heating |
| Working Method | Auto switch of two towers for 4 to 10 mins, continuous operation |
| Control Method | PLC control, 60min cycle of loop |
| Installation | Indoor, non-basis installation allowed |
| Power Supply | 1PH/220V/50HZ |
